Opening Instructions for Combination Locks
Download the Instructions Here: Combo Opening Instructions.pdf (To save: Right-Click and select "Save As...")
On the dial ring (stationary part attached to the door) there are 2 marks, one at the 12 o’clock and one at the 11 o’clock position (to the left). Use the mark at 12 o’clock.
1. Turn the dial counter clock-wise at least 5 times to clear the dial. Continue going counter clock-wise and stop on your first number.
2. Turn the dial clock-wise (to the right) to your second number (this will not be a complete turn). Then still going clock-wise (right) go to your second number again. Continue turning clock-wise (right) and go to your second number for the third time (you will actually go past your second number 2 times and then stop on the third).
3. Turn the dial counter clock-wise to your third number (this will not be a complete turn). Continue turning counter clock-wise (to the left) and go to your third number (you will actually go past your third number once and then stop on the second).
4. Turn the dial clock-wise (right) until the dial stops at around 90 ~ 95. The dial will completely stop and will not turn any further. Then you can turn the handle and open the safe.
After following these instructions, if you are still having a problem opening your safe, please contact the safe dealer where the safe was purchased.